How to make the automatic high-speed bag machine better and more stable and faster work? Need to pay attention to the following questions:
      1, discharge material to keep a smooth material
      Discharge, the height of the pendulum can not be too high too low, drag material, the elastic to be appropriate. If there is improper, will cause the material in the course of the operation, the emergence of radial jitter, and ultimately lead to bag length error, will cause the length of the bag stretch. This situation will need to clean the K-frame, adjust the discharge pressure roller pressure before and after the size.
      2, the temperature set to be appropriate
      The temperature is too high, will make the bag wrinkles, resulting in photoelectric tracking are not allowed to produce the length of the bag is different. In order to avoid tracking failure, you can first increase the photoelectric sensitivity, and other temperature stability, and then reduce the sensitivity. Production of different materials, suitable for the temperature is different.
      3, keep the product in the middle of the press roller
      Adjust the pressure roller around the balance of the gap, so that the left and right sides of the pressure roller to maintain balance, to avoid dragging left and right swing instability.
      4, the material to keep in the same level through
      The flatness of the bag is affected by the pressure of the hot knife, whether the material is in the same level.
      In addition to the above problems, the machine should be smooth, fast operation, but also need to set the computer parameters, so as to ensure that the automatic high-speed bag machine high-speed stable long-term operation.

On a message：Bag machines have huge market potential      Next information：Paper bag making machine industry development